Terminal B
Consisting of upper part of bracket, lower part of clamp, hexagonal bolts M8x60 and square nut M8.
Gratings
Slatted gratings
MEISER slatted gratings clearly stand out visually from a classic grating. The function of the filler bar in this design is performed by a tube that is inserted in the middle of the bearing bars. This gives the slatted grating a very high-quality appearance, but is less suitable for larger spans.
Ihre AnsprechpartnerNormally, the slatted grating does not have an edging, particularly to avoid disturbing the very clear design. Slatted gratings are often used as high-quality shaft covers in interior areas.
For this purpose, they can be made of aluminium and stainless steel, or of course the classic hot-dip galvanized steel. Further customization can be achieved using special bearing bar profiles and different tube diameters. When planning, please note that only bearing and filler bar lengths up to ≤1,200 mm can be produced for this type of grating.
Common mesh divisions
Common mesh divisions
| Support rod | Filler rod | |||
|---|---|---|---|---|
| 18,50 | 50 | 100 | 150 | 200 |
Standard bearing bar profiles
| Support rod 3 mm |
|---|
| 25/3 |
| 30/3 |
| 35/3 |
| 40/3 |
| 45/3 |
| 50/3 |
Matching accessories
Attachments for Slatted gratings
Terminal B10
Consisting of upper part of bracket, hexagon socket screw, lower part of bracket and nut.
Hilti clamp – XMGR
High resistance to vibrations, easy installation and therefore significantly shorter installation times characterize this mounting.
Welded-in perforated plates
Consist of welded-in perforated plates, the design and position of the perforated plates depend on the load on the grating.
