Terminal B
Consisting of upper part of bracket, lower part of clamp, hexagonal bolts M8x60 and square nut M8.
Gratings
Louvre grilles
Sometimes too much transparency is not desired. In these cases, the Venetian grating is used. The range of applications is wide and is not limited to floor coverings for bridges, walkways and transitions.
Ihre AnsprechpartnerThe louvre grille is also used as a sun protection or cladding element for ventilation grilles, façades and ceiling suspensions. MEISER offers the louvre grille in steel, aluminum and stainless steel.
The filler rods can be pressed in at an angle of 15°, 30° or 45° so that different degrees of transparency can be achieved. The maximum installation height for this product is 100 mm. A 15° filler rod inclination is technically only possible with a support rod thickness of 3 mm. Please contact us in advance.
Common mesh divisions
| Support rod | Filler rod | Filler rod | |
|---|---|---|---|
| 33,3 | 22,2 | 33,3 | 66,6 |
| 66,6 | 22,2 | 33,3 | 66,6 |
| 99,9 | 22,2 | 33,3 | 66,6 |
Standard bearing bar profiles
| Support rod 2 mm | Support rod 3 mm |
|---|---|
| 30/2 | 30/3 |
| 35/2 | 35/3 |
| 40/2 | 40/3 |
| 45/2 | 45/3 |
| 50/2 | 50/3 |
| - | 60/3 |
| - | 70/3 |
| - | 80/3 |
| - | 90/3 |
| - | 100/3 |
Matching accessories
Attachments for Louvre grilles
Welded-in perforated plates
Consist of welded-in perforated plates, the design and position of the perforated plates depend on the load on the grating.
