Terminal B
Consisting of upper part of bracket, lower part of clamp, hexagonal bolts M8x60 and square nut M8.
Gratings
Full grates
The full grating bears this name because the bearing and filling bars have the same cross-section and are therefore the same height. The bearing bar is the one that rests on both ends and whose underside is not slotted.
Ihre AnsprechpartnerThe advantage over the normal pressed grating is the increased privacy and the attractive design.
MEISER solid gratings can be manufactured in various materials and are available up to a height of 100 mm. For manufacturing reasons, one side of the solid grating must be smaller than 1800 mm. Depending on the application, various mesh pitches and edgings can be implemented. On request, we can adapt the design and dimensions to the respective span width and installation.
Common mesh spacings for bearing bars from 2 to 3 mm
| Support rod | Filler rod | ||||||
|---|---|---|---|---|---|---|---|
| 22,2 | 16,65 | 22,2 | 44,4 | 66,6 | |||
| 33,3 | 16,65 | 22,2 | 33,3 | 66,6 | |||
| 44,4 | 16,65 | 22,2 | 44,4 | ||||
| 66,6 | 16,65 | 22,2 | 33,3 | 66,6 | |||
Common mesh spacings for 5 mm bearing bars
| Support rod | Filler rod | |||
|---|---|---|---|---|
| 33,3 | 16,65 | 33,3 | 66,6 | 99,9 |
| 66,6 | 16,65 | 33,3 | 66,6 | |
| 99,9 | 16,65 | 33,3 | 99,9 |
Standard bearing bar profiles
| Support rod 2 mm | Support rod 3 mm | Support rod 5 mm |
|---|---|---|
| 25/2 | 25/3 | |
| 30/2 | 30/3 | 30/5 |
| 35/2 | 35/3 | 35/5 |
| 40/2 | 40/3 | 40/5 |
| 45/2 | 45/3 | 45/5 |
| 50/2 | 50/3 | 50/5 |
| 60/3 | 60/5 | |
| 70/3 | 70/5 | |
| 80/3 | ||
| 90/3 | ||
| 100/3 |
Matching accessories
Attachments for Full grates
Grille setting bolt fastening
Consisting of bolt and plate.
Safety terminal A
Consisting of upper safety part, lower clamp part, hexagon bolt and square nut.
Safety terminal D
Consisting of upper safety part, lower clamp part, hexagon bolt and square nut.
Hilti clamp – XMGR
High resistance to vibrations, easy installation and therefore significantly shorter installation times characterize this mounting.
Welded-in perforated plates
Consist of welded-in perforated plates, the design and position of the perforated plates depend on the load on the grating.
